22kW Smart EV Charging Station – 32A 3 Phase Type 2 with WiFi App Control

Upgrade your home, workshop or commercial EV charging setup with this powerful 22kW Type 2 EV Charging Station.

Designed for compatible three-phase 32A electrical supplies, this smart EV wallbox combines fast AC charging with WiFi app control, adjustable charging current, RFID access, scheduling and a 7.5-metre Type 2 charging cable.

Compatible with a wide range of Type 2 electric and plug-in hybrid vehicles including compatible BYD, Tesla, MG, Hyundai, Kia, Mercedes-Benz, Volvo, Porsche, Renault, Nissan and other EVs.

⚡ Up to 22kW Three-Phase EV Charging

With a compatible 400/415V three-phase 32A electrical supply and a vehicle capable of accepting 22kW AC charging, the charger can deliver up to 22kW of AC charging power.

Actual charging speed depends on your:

• Vehicle's onboard AC charger
• Electrical supply
• Installation
• Selected current setting
• Battery and vehicle charging conditions

Important: Not every Type 2 EV can accept 22kW AC. Vehicles with lower onboard AC charging limits will charge at their maximum supported rate.

📱 Tuya Smart WiFi App Control

Connect the charger to the Tuya Smart app on compatible Android and iOS devices for convenient charging management.

Depending on configuration, app functions include:

• Start and stop charging
• Schedule charging sessions
• Adjust charging settings
• View charging history
• Monitor charging activity remotely

Perfect for scheduling charging around your daily routine or available electricity tariffs.

🔋 Adjustable 6A–32A Charging Current

Choose between multiple charging current settings:

6A / 10A / 13A / 16A / 20A / 24A / 32A

This allows the charger to be configured according to the available electrical supply and charging requirements.

A configurable charging delay of approximately 0.5–8 hours is also available from the charger.

🔌 Two Installation Options

Hardwired Installation

The charging station can be permanently connected to a suitable distribution board.

Hardwired installation must be completed by an appropriately licensed electrician in accordance with applicable Australian electrical requirements.

32A 5-Pin Industrial Connection

The charger is supplied with a 32A 5-pin industrial plug for connection to a compatible three-phase industrial outlet.

The electrical circuit, outlet and installation must be correctly rated and suitable for EV charging.

🖥 LCD Charging Display

The integrated LCD screen provides useful real-time charging information, including:

• Voltage
• Current
• Charging power
• Charged energy/capacity
• Operating status

This makes it easy to monitor a charging session directly from the wallbox.

🔐 RFID Access Control

An RFID card is included, providing convenient access control for the charging station.

This is particularly useful for shared garages, workplaces and other installations where you may want greater control over charger access.

🛡 Integrated Electrical Protection

The charger is specified with residual-current protection incorporating 30mA AC and 6mA DC detection, along with protection functions for conditions such as:

• Residual/leakage current
• Overcurrent
• Overvoltage
• Undervoltage

Correct upstream protection and installation requirements should always be determined by the installing electrician.

🌧 IP65 Weather-Resistant Design

With an IP65-rated enclosure, the wallbox is designed for suitable indoor and outdoor installations.

Specified operating temperature:

-25°C to +55°C

Always install the charger according to the supplied instructions and applicable electrical requirements.

📏 Long 7.5m Type 2 Cable

The integrated 7.5-metre charging cable provides generous reach across garages, carports and driveways, giving you more flexibility when positioning your vehicle.

🚗 Type 2 EV Compatibility

Designed for compatible electric and plug-in hybrid vehicles using a Type 2 AC charging connection.

Compatible applications may include selected:

• BYD Atto 3 and other Type 2 BYD models
• Tesla Model 3
• Tesla Model Y
• MG4
• MG ZS EV
• Hyundai EVs
• Kia EVs
• Mercedes-Benz EVs
• Volvo EVs/PHEVs
• Porsche EVs/PHEVs
• Renault EVs
• Nissan Type 2 compatible models
• MINI electric models
• Peugeot EVs
• Jaguar EVs/PHEVs
• Other Type 2 electric and plug-in hybrid vehicles

Vehicle compatibility does not mean the vehicle will necessarily accept the full 22kW AC output. Check your vehicle's maximum AC charging rate before purchase.

Key Features

• Up to 22kW AC charging
• 32A three-phase operation
• Type 2 vehicle connector
• 7.5m charging cable
• WiFi connectivity
• Tuya Smart app support
• RFID access
• LCD display
• Adjustable 6A–32A current
• Scheduled/delayed charging
• 32A 5-pin industrial plug
• Hardwire installation option
• Residual-current protection
• IP65 enclosure
• Indoor/outdoor installation capability
• 2-year warranty

Specifications

Package Includes

• 1 × 22kW Type 2 EV Charging Wallbox
• 1 × Integrated 7.5m Type 2 Charging Cable
• 1 × 32A 5-Pin Industrial Plug
• 1 × RFID Card
• 1 × Cable Holder
• 1 × Installation Tool
• 1 × Microfibre Cloth

Important Australian Installation Information

This is a high-power three-phase EV charger.

Electrical installation, hardwiring, new circuits and/or installation of an industrial outlet must be undertaken as required by applicable Australian and state/territory electrical regulations.

A licensed electrician should confirm your property's three-phase supply, circuit capacity, protection requirements and installation suitability before installation.

Maximum 22kW charging requires both a suitable electrical supply and a vehicle capable of accepting 22kW three-phase AC charging.